Bamboo Flooring Test Result Datasheet

Bamboo flooring Brief introduction
The Bamboo flooring planks are machined with tongue and groove edges to provide interlocking assembly. The ends are also end-matched with tongue and groove. Each piece is machine sanded on top, with rough glue-ready surface on bottom. The edge above the tongue on the long edge is angled and ready to accept standard flooring nails.

Each pre-finished Bamboo flooring is coated with a clear, UV cured acrylic polyurethane. State of the art machinery is used to apply and cure the durable coating.

Three layer, all bamboo, tongue and groove plank 24 or 36 inches long by 3 5/8 inches wide by 5/8 inch thick, factory pre-finished with 3 coats of 100% solids UV cured Acrylic Urethane.

ABRASION RESISTANCE
Bamboo flooring tested according to ASTM C501 (H-22 Calibrated wheels loaded with
1000 gram weight at 70 RPM for 1000 cycles) weight loss = .349 grams =
..012 ounces. The test we have done for abrasion resistance showed that BamPlank tm finish is one of the toughest to be found in the wood flooring industry.

FLAMMABILITY
Bamboo flooring tested according to ASTM E648 Critical Radiant
Panel Test. Passes with a CLASS I rating per NFPA "Life Safety Code". (Can
be used in all classes of buildings.)

These test resluts can also find some other Bamboo flooring company, but their product not the same material, so the reslut maybe not quite same. If you are interested, we can offer some pieces of Bamboo flooring samples for your test.