Bamboo flooring installation instructions:

According design requirements, choose a suitable type of bamboo floor. Dasso Bamboo flooring comes in different thickness, widths, colors and patterns. Please consult a sales representative for detailed information.
Under normal conditions, balance the material over 48 hours before installation and install it on the clean, smooth and dry basis of wood surface.
Flooring boards can either be nailed or glued onto the sub floor. The sub floor must be flat clean, dry and sturdy enough to support nails and glue. Moisture is factor particularly if there is a soil layer beneath the sub floor. While installing prefinished Bamboo flooring, you should nail it at a 45 or 50 degree angle; you should make a hole beforehand if the nail size is too big because it may crack the tongue; you should use a oil based glue or a glue with low water content to glue the floor. If you use high water based glue, it may make the flooring swell because the floor absorbs the water from the glue.
When choosing the lacquered flooring, determine the suitable level of space between the boards to accommodate local weather conditions. For example, in humid regions, the boards will need to be installed more loosely to leave room for possible expansion.
For unlacquered flooring, first thoroughly clean the surface, tongues and grooves. Apply at least three coats of PU paint with an oily cloth. The thickness and shininess of the lacquer should be determined according to the cost and lacquering effect.

Bamboo Flooring